Tuesday, December 6, 2011

Three Steps To Breaking In Your New Baseball Glove

By Jason C Specht The art of breaking in a baseball glove is a very important thing to consider if you want to get that same feel of old baseball gloves. There are several different ways to go about breaking in a glove, but we are going to go over one of the more common methods here. It used to be pretty tough to break in a new glove, as all of the gloves were very stiff when they came from the manufacturer. I remember way back when that my dad actually put mine in the oven for a while after rubbing some kind of weird oil on it to loosen it up. Many things have changed in the world of baseball gloves, and most of them these days are softer than their counterparts from twenty to thirty years ago. So here are the three steps to breaking in a baseball glove: •The first thing that you will need to do is to pick up some baseball glove oil. There are many different brands out there, and all should do pretty-much the same. The oil that I used was the Franklin Baseball Glove Oil that I picked up at WalMart, but you could get yours at a sporting goods store or online as well. •After you get your oil, you will want to remove all of the dirt and debris from your glove by wiping it down with a clean, dry cloth. After this is done, you just apply the baseball glove oil to the inside part of your glove. You only want to put it on the inside part, not the outside. While the procedure for different oils may vary, you usually just wipe it on with one dry cloth and then wipe it off with another clean one. After doing this, you just let it sit for a while so the oil can soak into the leather. •This next part is the way that I personally break in my own gloves. After applying the oil and letting it sit for a while, I'll take a baseball or two and put them into the web of the glove and then close it up tight. I'll then take some string, shoelaces, or whatever else I can find and tie the glove up tight, with the balls inside the web. This will help to form the pocket. After tying it up, I put it underneath my mattress and sleep on it for a night or two. After doing all of this, your glove should be well on its way to being broken in. It will surely give you that worn-in feel of old baseball gloves that is so desirable. Visit us at http://www.baseballglovesandbats.com for more information on gloves, bats, and baseball in general. So ditch that stiff feel of a brand new glove, and break yours in today! Article Source: http://EzineArticles.com/?expert=Jason_C_Specht Article Source: http://EzineArticles.com/6494059

No comments: